How to Install a Pedestal Sink

How to Install a Pedestal Sink

bathroom pedestal sinks are the type of sink that rest on a separate piece of porcelain that acts as a leg to help hold it in place. The pedestal is also used to hide the water supply lines and drainage pipes.

Pedestal sinks are the right choice for smaller bathrooms with limited space, or older houses that are decorated in a classic or historic theme.

While pedestal sinks will allow easier access to your plumbing if tHere’s ever an issue, tHere’s one downside. Βecause of their design, they do not allow for a lot of counter space, nor any area for storage in cabinets underneath. For that reason, most house owners opt to place pedestal sinks in half bathrooms or powder rooms where lots of storage is not needed.

However, if space is not an issue in your bathroom and you like the look and these types of sinks, you certainly can address the lack of built−in storage with separate shelving and cabinets for towels and toiletries.

Pedestal sinks are typically sold in two separate pieces, the sink and the pedestal. Keep that in mind when looking in stores or online so that you understand the price you see may only be for one piece. Rarely are they ever sold or boxed together since They’re on the heavy side.

Removing an old sink and vanity and replacing it with a new pedestal sink will take most people a day to finish up assuming you do not have to do any new plumbing. The cost for this project can range anywhere from $200 to $500 and up depending on the type of sink you select.

Typically the only tools that you’ll require to complete this project are a basin wrench, channel pliers, a putty knife, a screwdriver, a hacksaw and caulking gun.

Βefore you go to the house improvement store to purchase a sink, take measurements of the height of any existing structures (if any) on the wall, such as any recessed shelves or tooth brush or soap holders in the wall. Βecause the parts are heavy and sometimes awkward to handle when sitting in place, you’ll more than likely need someone to help you install the sink and pedestal.

Removing an old sink and vanity can either go easy or much harder depending on what you have to deal with and how tight of a space you have to work in. More than likely you’ll have to literally dive into a vanity to remove the drain and water supply lines and disconnect the trap. Αt this stage, a good pair of channel pliers will come in handy.

Most bathrooms have tiled floors and walls, however if you’re dealing with a half bath or powder room, you may have to repair drywall behind the vanity before proceeding. Inspect the wall for any imperfections and repair as needed. This step is particularly important since a pedestal sink and stand will expose much more area of the wall than the vanity you removed. you’ll probably have to repair, sand, prime and paint the drywall.

If you have tiled walls, the prep will go much faster unless you broke or chipped any tiles while removing the old assembly. If that’s the case, you’ll need to chisel out the grout from the broken or chipped tile, break it, then remove the pieces from the wall and replace.

The most difficult part of repairing either of these types of walls will probably be finding the paint to match the existing wall, or finding an extra piece of tile that matches. However, if that portion of the wall is going to be exposed, you must address this now.

Pedestal sinks have two methods of support. The sink itself attaches to a wall bracket, then rest on the porcelain pedestal. However, the main support will come from the wall bracket so it’s crucial that you get this part right. Wall brackets must be supported by wall studs. This can be difficult considering that pedestal sinks must be centered over the existing drain pipe so it can be hidden. Follow the manufacturer’s recommendation on the proper height for the sink and installation of the bracket.

While the sink is set aside, install the new faucet on top and the new drain on the bottom.Credit: Opensource via Wikimedia Commons

If everything went as planned, you should be finished in less than a day. If it’s your first time installing a sink of this type, go slowly and follow the instructions above carefully. This particular project requires no special plumbing skills provided you do not have to relocate the water supply and drain to another area. In that case, call a plumber because that’s a difficult job.

However, you should be able to create the look you want with a minimal amount of effort and money by doing this yourself. Use the money you saved to buy some shelving to store hand towels or larger items out of the way as sink space will be limited.

Source: here